Pressure overpressure sensor Turbo Flow PS

Pressure sensors Turbo Flow PS are used to measure overpressure and data transmission to automatic process control system (APCS) via unified output signals or wireless commu­nication channels.

Purpose:

Pressure sensors Turbo Flow PS are used to measure:

• overpressure;
• data transmission to automatic process control system (APCS) via unified output signals or wireless commu­nication channels.

Field of application:

Pressure sensors are used for monitoring, regulation and control of production processes, including commercial energy resource metering systems, as well as for data transmission via wireless interfaces.

Features:

• Visual monitoring of the current value of measured pressure on the LCD-indicator;
• A multifunction indicator (numerical value of parameter, units of measurement, temperatures, actuation levels of preset values, setting parameters);
• Operational zero setting;
• Selection of system and setting of measurement units (Pa, kPa, MPa, kgf/cm², kgf/m², mA);
• Setting of output signal averaging time (damping);
• Setting for a “shifted” measurement limit;
• Correction of measurement errors by means of built-in microprocessor and temperature sensor;
• Testing and control of sensor parameters at a distance by means of computer;
• Protection of settings from unauthorized access;
• Data transmission to the upper level by means of ModBus RTU protocol via RS-485/RS-232 interfaces;
• Archiving, recording and storage of information on pressure and temperature values.

Configuration:

By pressure:

• For low pressure (up to 1.6 MPa);
• For high pressure (from 1.6 MPa to 40 MPa).

Based on explosion protection:

• 0 Ex ia  IIC  T6;
• 1 Ex d IIC  T4 Gb X.

Certificates

Documentation

Passport (RUS)

Operation manual (RUS)

Verification procedure (RUS)

Description of Measuring Instrument (RUS)